Cobra Electronics 29NW ST - Manual (Page 13)

Operation Operation
PA (Public
Address)
25 24
PA (Public Address)
Connect an external PA speaker to the PA jack
on the rear panel.
Set CB/PA switch to PA position.
Push and hold microphone button and speak
in a normal voice. Your voice will now transmit
on the PA speaker.
Adjust PA speaker volume with the
Dynamike control.
Note
Speaker should have 8-ohm
impedance and be rated to
handle at least 4.0 watts.
Note
The speaker should be directed
away from the microphone to
prevent acoustic feedback.
Note
Activity on the CB channel
will be heard through the PA
speaker. Adjust Volume Control
for normal listening level.
1
2
3
4
29 NW ST manual3.3 6/15/99 12:50 PM Page 24