Neu-F NF.6601 User Manual
Short shift adapter – nf.6601
neu-f ® • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX •
•
www.neu-f.com
PARTS LIST:
TOOLS REQUIRED:
1 – Shifter Adapter
1 – M6x16mm Socket Cap Screw
1 – 9/16” Wrench
1 – 5MM Hex Key Wrench
1 – Large Screwdriver
1 – Locking Plate
1 – 13MM Cable Ball End
1 – T25 TORX
1 – Channel Lock Pliers
1 – Masking Tape
1 – Metal File
1.
Grab the rear of the center console top and lift up to detach.
2.
Remove the T25 Torx screw and 5mm Hex Key bolt from
each side on the top edge of console.
3.
Remove the T25 Torx screw from driver side lower cover
then pull off.
4.
With cover removed, remove exposed T25 Torx screw.
5.
Remove the T25 Torx from passenger side lower cover then
pull off.
6.
With cover removed, remove exposed T25 Torx screw.
7.
Tip back top of main console cover to separate from
dashboard, and then lift out.
8.
Using one or two screwdrivers pry off cable socket end from
ball on shift lever.
SHORT SHIFT ADAPTER – NF.6601
Fits 2012-up Fiat 500 All Models w/ Manual Transmission