National Cart SAMPLING STAND - Manual (Page 3)

*** For the latest product information go to www.nationalcart.com ***
Revision Date: Mar. 2013
Safety Inspection Checklist
If one or more of the following criteria fails upon
inspection of a rolling stock product, – RE-
MOVE FROM SERVICE IMMEDIATELY UN-
TIL A REPAIR OR REPLACEMENT CAN BE
MADE. Items that have been removed from
the fleet for repair should be tied together with
a lock and chain and labeled “DO NOT USE –
UNSAFE” until they can be repaired or
replaced.
All Safety-Warning Labels are
present and fully legible.
All moving parts can be operated
properly and with ease.
There are no missing or broken
components on the cart and all
fasteners are tight and secure.
Wheels and casters are not bent,
loose or missing from their
mountings and the wheels roll
freely.
There are no bent, cracked, sharp
or protruding areas on the cart
that may cause injury.
All welds and/or joints are intact
and the cart is level to the ground.
Maintenance
Recommendations
Your National Cart Products have been de-
signed to withstand the daily rigor of normal use
and to perform as expected throughout their ser-
vice life with minimal maintenance. While spe-
cial cases may exist, the care and maintenance
of the products is your responsibility. By follow-
ing the procedures listed below, you can be sure
that your purchase will have a long and useful
life. We strongly recommend that you perform
routine maintenance every 3-6 months and al-
ways clean according to your companies sanita-
tion plan. The products should be serviced by a
trained in-house associate, or a qualified service
company.
Replace Worn Components.
• Parts such as plugs, caps, hand grips, cast-
ers, bumpers, removable components, etc can
be easily replaced during routine maintenance.
Certain repairs may require a higher level of
mechanical expertise and knowledge. Please
contact your customer service representative if
you are unsure of any necessary repair.
• High or Low temperature applications may
require specific replacement parts