beautypg.com

Safety inspection checklist, Maintenance recommendations, Replace worn components – National Cart AL-UB-2248-1PH ALUMINUM UTILITY CARTS (U-BOAT) User Manual

Page 3

background image

*** For the latest product information go to www.nationalcart.com ***

Revision Date: Mar. 2013

Safety Inspection Checklist

If one or more of the following criteria fails upon

inspection of a rolling stock product, –

RE-

MOVE FROM SERVICE IMMEDIATELY UN-

TIL A REPAIR OR REPLACEMENT CAN BE

MADE. Items that have been removed from

the fleet for repair should be tied together with

a lock and chain and labeled

“DO NOT USE –

UNSAFE” until they can be repaired or

replaced.

All Safety-Warning Labels are

present and fully legible.

All moving parts can be operated

properly and with ease.

There are no missing or broken

components on the cart and all

fasteners are tight and secure.

Wheels and casters are not bent,

loose or missing from their

mountings and the wheels roll

freely.

There are no bent, cracked, sharp

or protruding areas on the cart

that may cause injury.

All welds and/or joints are intact

and the cart is level to the ground.

Maintenance

Recommendations

Your National Cart Products have been de-

signed to withstand the daily rigor of normal use

and to perform as expected throughout their ser-

vice life with minimal maintenance. While spe-

cial cases may exist, the care and maintenance

of the products is your responsibility. By follow-

ing the procedures listed below, you can be sure

that your purchase will have a long and useful

life. We strongly recommend that you perform

routine maintenance every 3-6 months and al-

ways clean according to your companies sanita-

tion plan. The products should be serviced by a

trained in-house associate, or a qualified service

company.

Replace Worn Components.

Parts such as plugs, caps, hand grips, cast-

ers, bumpers, removable components, etc can

be easily replaced during routine maintenance.

Certain repairs may require a higher level of

mechanical expertise and knowledge. Please

contact your customer service representative if

you are unsure of any necessary repair.

High or Low temperature applications may

require specific replacement parts

This manual is related to the following products: