Mytek Digital Private-Q Multichannel System (ver. 1.0 / Jan 2014) - Manual (Page 8)

Mytek PQ Multichannel System – User's Manual
Floating System
Floating system is recommended for equipment rental companies
and those users who prefer not to run any permanent wiring in the
studio. A mixed (combination of floating and permanently installed)
system is recommended for the multiroom studios where the Private
Q is going to be moved between rooms.
Floating system uses existing microphone lines to feed the signals
from the patchbay. Mytek will provide a Centronics to XLR cable for
this purpose. If the system is frequently used fixed booth extensions
are recommended to avoid inconvenience of running cables through
the booth doors. A flight case is strongly recommended for a floating
system (a must for a rental system); it will keep whole system neat
and clean and Private Q will serve you longer.
Please refer to "Grounding" section for proper grounding of the
system.
User Manual ver. 1.0 / Jun 2013 www.mytekdigital.com Page: 8 / 14
ISOLATION BOOTH
PQ BOX
PQ BOX
PQ BOX
PQ BOX
PQ RACK
STUDIO
AC POWER
CONTROL
ROOM
OPTIONAL BOOTH EXTENSION CABLE
CAN BE INSTALLED FOR
THE STATION IN THE ISO BOOTH.
IF YOU DON’T HAVE THE EXTENSION
YOU WILL HAVE TO RUN THE CABLE
THROUGH THE BOOTH DOOR.
PA
TC
H
BA
Y
MIKE PANEL
THE SYSTEM IS FED FROM THE PATCHBAY
USING THE MIKE LINES USUALLY ALREADY
EXISTING IN MOST STUDIOS.
OPTIONAL OUTPUT SIGNALS FROM
THE RACK AND CONTROL SIGNAL
FOR THE REMOTE ARE SENT THE SAME
WAY