General operation – MUTEC MC-3+ Smart Clock User Manual

Page 13

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

B E D I E N E L E M E N T E

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

Manual SDs-01 D 3.2.2003 17:45 Uhr Seite 3

GENERAL OPERATION

Selecting Function Menus and setting Functions

Operating the MC-3+ SMART CLOCK is very easy! The device is fully
operated using the two keys at the front panel.

1 Pressing the »MENU« key toggles between different basic function
menus.
2 Pressing the »SELECT« key activates individual functions within one
function menu.

Steps of Operation

1 The first press on »MENU« or »SELECT« key enables the last selected
function within the last selected function menu. The corresponding LED
starts flashing.
2 Every press on »SELECT« button will select a new function within a menu.
The LED of the selected function flashes accordingly. After the LED stops
flashing, the function is activated.
3 When the needed function is selected, do not press the switches again!
After a period of approx. 4 seconds the LED of the selected function stops
flashing.

The »STATUS« area is not accessible by using the »MENU« and »SELECT«
keys, it only shows different operating conditions of the device.

Safety Instructions

For safety reasons, be sure to
read the SAFETY INSTRUCTIONS

and INSTALLATION chapters before first
powering-up!
We also recommend reading the CONTROL
ELEMENTS AND TERMINALS chapter for
information on how to connect MC-3+ !

2. SELECT

selects individual

functions within

one function

menu.

1. MENU

selects individual

function menus.

MENU + SELECT operation

Function Menus + Functions

Menus

Functions