Mojave Audio MA-301fet - Manual (Page 5)

TECHNICAL SPECIFICATIONS
TRANSDUCER TYPE:
Externally polarized, pressure gradient
capacitor, dual membrane
DIAPHRAGM:
1-inch diameter, gold sputtered
DIAPHRAGM THICKNESS:
3-micron
POLAR PATTERN: Switchable between omnidirectional, cardioid and figure-
eight
FREQUENCY RESPONSE:
20 Hz-20kHz, + 3dB at ‘Flat’ setting. Bass cut switch
provides 6dB per octave attenuation below 100Hz in ‘cut’
posistion
SENSITIVITY:
-40.5 dB re. 1V/pa
MAXIMUM SPL:
120 dB, 135dB with pad on
DISTORTION:
<1% @120dB SPL, <3% @ 134dB SPL with pad off
< 1%@134dB SPL, <3% @ 148dB SPL with pad on
SELF NOISE:
14dB nominal, not to exceed 16dB (A weighted)
IMPEDANCE:
550 ohms, transformer balanced
DIMENSIONS AND WEIGHT:
Carrying case with microphone, shockmount
10” x 9” x 4.5”, 4 lbs. lbs.
Microphone: 7 5/8 X 2” (194mm x 51mm) 1 lb. (0.45Kg)
SHIPPING WEIGHT:
6 lbs.
POWER REQUIREMENTS:
48v Phantom Power