Milwaukee Tool 2605-20 User Manual

Page 3

FUNCTIONAL DESCRIPTION

SPECIFICATIONS

Cat. No.

Volts DC

No Load

RPM

No Load

Blows per

Minute

Capacities

Drill Only

Rotary Hammer (concrete)

Steel

Wood

Carbide Tipped Percussion Bit

2605-20

0 - 1400

0 - 4800

1/2"

7/8"

SYMBOLOGY

• Wear ear protectors. Exposure to noise can

cause hearing loss.

• Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal injury.

• Hold power tool by insulated gripping sur-

faces, when performing an operation where
the cutting tool may contact hidden wiring.
Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.

• WARNING Some dust created by power sanding,

sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:

• lead from lead-based paint
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending

on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to fi lter out microscopic particles.

1. Side handle
2. Clamp
3. Depth gauge rod
4. SDS Plus bit holder

5. Release collar
6. Mode selector
7. Selector release button
8. Trigger
9. Control switch

SPECIFIC SAFETY RULES

• Have your power tool serviced by a qualifi ed

repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.

SERVICE

Volts

Direct Current

BPM

Blows per Minute (BPM)

No Load Revolutions per
Minute (RPM)

Underwriters Laboratories, Inc.
United States and Canada

• Use power tools only with specifi cally desig-

nated battery packs. Use of any other battery
packs may create a risk of injury and fi re.

• When battery pack is not in use, keep it away

from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery terminals
together may cause burns or a fi re.

• Under abusive conditions, liquid may be eject-

ed from the battery; avoid contact. If contact
accidentally occurs, fl ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.

OPERATION

WARNING

To reduce the risk of injury,

keep hands away from the bit and all moving
parts. Always wear safety goggles or glasses
with side shields.

Fig. 1

Drilling

Depth

Installing Drill Bits and Chisels
NOTE: Only use accessories with SDS or SDS
Plus shanks.
Be sure that the shank of the bit is clean. Dirt par-
ticles may cause the bit to line up improperly. Do not
use bits larger than the maximum recommended
capacity of the drill because gear damage or mo-
tor overloading may result. For best performance,
be sure that the bit is properly sharpened and the
shank is lightly greased before use.
1. Insert the bit or chisel into the nose of the tool.
2. Rotate bit slowly until it aligns with the locking

mechanism.

3. Push bit into tool until it locks.
4. Check that the bit is locked properly; it should

be possible to pull the bit back and forth slightly
(about 1/4").

5. To remove bits and chisels, pull bit holder release

collar toward the rear of tool and remove bit.
NOTE: Use caution when handling hot bits and
chisels.

Selecting Action
MILWAUKEE Rotary Hammers have three settings:
rotation only, rotary hammer, and hammer only.
Always allow the motor to come to a complete
stop before changing the mode selection to avoid
damage to the tool.
1. For rotation only, press in

the selector release button
and turn the selector lever
so the arrow on the lever
points to the twist drill
symbol.

2. For rotary hammering, press

in the selector release button and turn the selec-
tor lever so the arrow points to the hammer and
twist drill

symbol.

3. For hammering only, press in the selector release

button and turn the selector lever so the arrow
points to the hammer

symbol.

4. To freely rotate the bit to the desired angle for

hammering only, press in the selector release
button and turn the selector lever to the
symbol. Then, follow step 3.

NOTE: To engage the hammering mechanism,
maintain pressure on the bit. When pressure on the
bit is released, the hammering action will stop.

Using the Control Switch
The control switch may be set to three positions:
forward, reverse and lock. Always allow the motor
to come to a complete stop before using the control
switch to avoid damage to the tool.
For forward (clockwise) rotation, push in the control
switch from the right side of the tool. Check the
direction of rotation before use.
For reverse (counterclockwise) rotation, push in the
control switch from the left side of the tool. Check
direction of rotation before use.
To lock the trigger, push the control switch to the
center position. The trigger will not work while the
control switch is in the center locked position. Always
lock the trigger or remove the battery pack before
performing maintenance, changing accessories,
storing the tool and any time the tool is not in use.

WARNING

Always remove battery

pack before changing or removing acces-
sories. Only use accessories specifically
recommended for this tool. Others may be
hazardous.

ASSEMBLY

WARNING

Recharge only with the

charger specified for the battery. For spe-
cifi c charging instructions, read the operator’s
manual supplied with your charger and battery.

Removing Battery Pack from Tool
Push in the release buttons and pull the battery
pack away from the tool.

Inserting Battery Pack into Tool
To insert the battery pack onto the tool, slide the
pack onto the body of the tool. Make sure it latches
securely into place.

Adjusting the Side Handle Position
1. Loosen the side handle by unscrewing the side

handle grip until the side handle rotates freely.

2. Rotate the side handle to the desired position.
3. Tighten the side handle grip securely.

Setting the Depth Gauge
1. Press in the clamping lever.
2. Slide the depth gauge rod backward or forward

until it is set for the desired depth.

NOTE: The drilling depth is the distance between

the tip of the bit and the tip of the depth gauge rod.

3. Release the clamping lever.

WARNING

Always remove battery

pack before changing or removing acces-
sories. Only use accessories specifically
recommended for this tool. Others may be
hazardous.

WARNING

To reduce the risk of injury,

always use a side handle when using this tool.
Always brace or hold securely.