Clarion SR6000 User Manual

Page 38

Then press

to advance the minute selection or

reverse the minute selection. Once the correct time is displayed

simply stop pressing any buttons for 15 seconds and the trans-

ceiver will automatically exit the clock mode.

temperature check mode

This system will report the interior temperature of your vehicle
with the press of three buttons. To activate the temperature
display press

and

simultaneously and then

release. You will hear a melody and the interior temperature will
appear on the LCD screen for five seconds.

timer mode

By pressing the remote

and

buttons the parking

lights will flash 4 times and then start the vehicle and run for the

set duration. The remote start can be shut off by the remote by

pressing the remote start button

and remain in timer

mode, but if any other shut down zones or the ignition becomes

active the timer mode will cancel.

Press Timer mode buttons.

The vehicle will confirm with 4 parking light flashes.

A 1-second delay will start.

➜

note: If the ignition is on, the temperature check will not
work.

➜