MIDI Solutions Footswitch Controller - Manual (Page 12)

12
SONG SELECT
SONG SELECT INC
SIMULATE FOOTSWITCH CLOSURE
To program the Footswitch Controller to send out a Song Select message when the footswitch is depressed, send it
the following System Exclusive programming command:
= Song Select sent on depression of footswitch
is optional, specifies Song Select sent on release of footswitch
To program the Footswitch Controller to send out Song Select #5 when the footswitch is depressed, send it the
following System Exclusive programming command:
F0 00 00 50 04 0E F7
To program the Footswitch Controller to increment Song Select messages when the footswitch is depressed, send it
the following System Exclusive programming command:
is optional. = minimum value, = maximum value
To program the Footswitch Controller to increment through Song Select numbers 0 - 10 in response to depression of
the footswitch, send the it the
System Exclusive programming command:
F0 00 00 50 04 0F F7
To cause the Footswitch Controller to simulate the action of the footswitch without physically depressing or releasing
the footswitch, send it the following following System Exclusive message:
= 00: Simulate RELEASE, = 01: Simulate DEPRESSION
To cause the Footswitch Controller to simulate a System Exclusive
message:
F0 00 00 50 04 0E ss (tt) F7 (all values in Hexadecimal)
ss
tt
Example
04
F0 00 00 50 04 0F 01 (xx yy) F7 (all values in Hex)
xx yy xx yy
Example
01 00 0A
F0 00 00 50 04 10 aa F7 (all values in Hexadecimal)
aa aa
Example
following
footswitch depression, send it the following
F0 00 00 50 04 10 F7 01