MIDI Solutions Quadra Merge - Manual (Page 3)

Thank you for purchasing the MIDI Solutions Quadra Merge.
The MIDI Solutions Quadra Merge merges up to four MIDI Ins to one MIDI Out, and may be chained together with
other mergers for as many inputs as required. The MIDI Solutions Quadra Merge is MIDI-powered and requires no
batteries or power supply to operate.
INTRODUCTION
Connect the MIDI Outs or Thrus of the sending MIDI devices to the MIDI inputs ( , , , and ) of the Quadra
Merge. Connect the MIDI of the Quadra Merge to the MIDI In of the receiving MIDI device. Power is provided to
the Quadra Merge by the device that is connected to In1, if a device does not provide power it can be connected to
In2, In3, or In4. It is recommended that the number of MIDI Solutions products chained together between any two
MIDI devices be limited to four.
In1 In2 In3 In4
Out
The Quadra Merge's MIDI Indicator LED will light as soon as the sending device is turned on, and flashes whenever MIDI
data passes through the unit. All MIDI messages appearing at the MIDI inputs are merged to the MIDI output.
CONNECTIONS
OPERATION
3
MIDI Out or Thru
Sending Device #2
MIDI Out or Thru
Sending Device #3
Receiving Device
MIDI In
MIDI Indicator LED
MIDI Out or Thru
Sending Device #1
MIDI Out or Thru
Sending Device #4
MIDI Solutions TM
Made in Canada
MIDI
In1 Power
Out
In4 In3
Quadra Merge
In2