Warranty policy 8. ce marking, Specifications, Packing list – MicW i855kit User Manual
Page 2: Accessories, Sa011

2 Guitar recording
5 Clip Installation
TP011 Tape for
1825,i855
3 Interview
4 Vocal recording
7. WARRANTY POLICY
8. CE MARKING
The MicW i825/i855
microphones conform
with the relevant CE mark
derectives approved by the
European commission
Type
Capsule diameter
Principe of operation
Polar Pattern
Sensitivity(±3dB)
Frequency Response
S/N ratio
Impedance
Power Source
Operating Temperature
Cable Length
Weight
Connector
Electret Condenser
4.0mm
Pressure
omnidrectional
-45 dB (5.6mV/Pa)
20 Hz~20kHz
More than 65dB
Less than 4.5k
Plug-in power capability, Plug and play
-17 ~+60
1.6m
5g
3.5mm 4-Pole headset interface
Microphone i825
9. SPECIFICATIONS
Type
Capsule diameter
Principe of operation
Polar Pattern
Sensitivity(±4dB)
Frequency Response
S/N ratio
Impedance
Power Source
Operating Temperature
Cable Length
Weight
Connector
Electret Condenser
4.0mm
Pressure Gradient
Cardioid
-49 dB (3.5mV/Pa)
100Hz~10kHz
More than 58dB
Less than 2.5k
Plug-in power capability, Plug and play
-10 ~+50
1.6m
5g
3.5mm 4-Pole headset interface
Microphone i855
10. PACKING LIST
1 Microphone
4 Windscreens
2 Clips
10 Stick tapes
1 Split Adapter
1 User manual
i825/i855 Kit include
12. ACCESSORIES
CB011:2m Extension cable
CB012:Split cable
CB013:PC/Laptop adapter cable
AC011:Aluminum Case.
WJ011:Windjammer
PI49: Preamp conventer
More information can be found at
www.mic-w.com
There are a number of accessories
available from MicW. The accessories can
be purchased separately:
step 1
step 2
step 3
MicW Audio warrants that its Products
will be free from defects in material and
workmanship for one (1) year from the date
of purchase by the Original Purchaser.
CB011
2 meter extension cable
CB012
3.5mm Y-adapter to 3.5mm
microphone input and
headphone output jacks
CB013
PC / Laptop adapter cable
AC011
Microphone carrying case
and stand mount, a unique
aluminum storage case with
3/8” thread protects your
microphone when not used
and holds it when mounting on
a microphone stand
WJ011
Windjammer for i266
microphone for maximum
reduction of wind noise in
outdoor environments
PI49
2.5 Volt to 48 Volt phantom
power preamp converter
SA011
Split Adapter for 3.5mm microphone input and
headphone output jacks
Caution: It may leave the mark on the surface.