Load bar assembly (group 6) – Malone MPG460G 2011 User Manual
Page 21
800-295-0042 ext 206
21
MPG460G
LOAD BAR ASSEMBLY (Group 6)
1.
Attach a load bar support tube onto the rear
cross member. Cross the U-Bolts.
Center the support tube and brackets on the
trailer and tighten.
2. Attach the second support tube 48 inches forward.
Install these U-bolts parallel, not crossed. Measure 48”
on both sides of the trailer to be sure the load bar is on
straight, then tighten the U-bolts.