Luma Comfort MF26B Manual - Manual (Page 8)

8
www.LumaComfort.com
S
TEP
3: A
SSEMBLING THE
S
TAND
P
OLE
a. Refer to diagram 3. Locate the tank cart and stand pole. Remove the four
M8x20 bolts, spring washers, flat washers and nuts from the tank cart.
b. Position the stand pole on the tank cart and align the holes on the pole
with the four holes on the cart.
c. Using the bolts, washers and nuts removed in step a, screw the stand pole
into the tank cart. Make sure the stand pole is securely screwed onto the
tank cart before proceeding to the next step.