Qos commands – Longshine LCS-GS8208-A V.2 User Manual
Page 38

37
QoS Commands
Commands at QoS level:
QoS Configuration [
QoS Mode [
QoS Port [
QoS Tagprio [
QoS DiffServ [
QoS Configuration [
Description:
Show the configured QoS mode, VLAN user priority mapping, default class,
default VLAN user priority and DSCP mapping for the port.
[
QoS Mode [
Description:
Set or show the QoS mode for the port.
[
[tag|port|diffserv]: Enable tag, port or IP differentiated services
class of service for the port (default: Show mode).
QoS Port [
Description:
Set or show the port class. In tag mode, the default class is used
for untagged frames. In port mode, the default class is used as the port
priority. In diffserv mode, the default class is used for non-IP frames.
[
[
QoS Tagprio [
Description:
Set or show the VLAN user priority mapping.
[
[
[