Longshine LCS-C862 - Manual (Page 12)

10/100/1000T TO 1000SX/LX SFP MEDIA CONVERTER
9
6 Appendix: Mini Converter Chassis
6.1 Mini Converter Chassis
The Chassis is developed to accommodate just one media converter. The Chassis
provides AC or DC power protection for converter units.
Now, network designers can plan their Ethernet, Fast Ethernet, ATM, or Gigabit
networks without having to worry about the power source. Also, its uniquely compact
size allows it to be installed in locations where space is limited.
6.2 Features
• Simple and easy to install
• Adds fiber connectivity to otherwise copper-based networks
• Supports 10/100/1000Base-T, copper, fiber, single/multi-mode, ST, SC, MT-RJ,
VF-45, LC, WDM connector converters
• Supports one media converter
• Suitable for networks of all sizes in all locations
• Provides internal AC and DC switching power supply
• Made from high-quality durable steel
• Optional external redundant power adapter
6.3 Affixing Brackets
We have supplied 2 special brackets that easily attaches to the Converter. This allows
for the secure placement of the Converter into the Chassis. It also seals off the front of
Chassis and allows it to function correctly.
Step 1 Using a Phillips screwdriver; remove two screws from the side panels on the
converter.
Step 2 Place the converter and brackets on a flat horizontal surface as illustrated above.
Secure the brackets by replacing the screws.
Ensure that the rails are flush with the underside of the Converter. The Converter is now
ready for loading into the Chassis.