Longshine LCS-C842MT - Manual (Page 13)

10/100Base-TX to 100Base-FX Converter
- 11 -
3
LED Indicators
This converter has LED indicators located at the front of the device.
The LEDs have been designed to give easy at-a-glance network
status, and provides ‘real-time’ connectivity information. Please see
below for an interpretation of their functions:
Unit LEDs: PWR: Red light - indicates normal power
Port LEDs: FDX: Amber light - indicates full-duplex
mode
COL: Flashing amber light - indicates
collision
LNK: Green light - indicates receiving link
pulses from a compliant device
ACT: Flashing green light - indicates
packets are being transmitted or
received
100: Green light - indicates packets
transmitted at 100 Mbps