Longshine LCS-C819 - Manual (Page 18)

19" Rack-mount 12-port Converter Chassis
-15-
Installing the Chassis
The Chassis is made from a combination of steel and
aluminum and is very sturdy in design. This allows the
Chassis to be installed in the following ways.
Rack-mount
The Chassis is built to established EIA Standards and
as such will fit into any 19” EIA designed rack. Refer
to the section “Rack-mount”
Wall
- Mount
The Chassis can be mounted separately on a wall
with the use of a shelf. This should be securely
mounted on a suitable structure and must be able to
hold at least 15kg. The shelf should also be big
enough to accommodate the Chassis whilst still
offering space for adequate ventilation.