Longshine LCS-8051A - Manual (Page 16)

Chapter 2 Installation
13
7. Press “OK” to select “ISDN1-NTWANMP” as one of the
“RAS Capable Devices”, you should then see the
following screen.
8. Click “Add...” for adding “ISDN2-NTWANMP” to the
list of RAS communication ports. The “ISDN1” and
“ISDN2” ports make the ISDN card be capable of
dialing or receiving multilink calls. For more details
about configuring the multilink support in Windows NT
4.0, please refer to the on-line help of RAS.
9. Click “Continue” to complete RAS setup, and you
should see the ISDN card has been installed as a
network adapter.