Longshine LCS-6380 - Manual (Page 4)

MN2000000153 Page 4
Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector with
the selected PCIe slot on the motherboard. Push the board down
firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® XP/Vista/7 (32/64 bit)
1. Please insert the CD driver bound with USB 3.0 2-Port PCI
Express Card into your CD-ROM Drive.
2. At the Windows desktop, click Start, Run.
3. Type D:\PCIe\NEC uPD720200\Setup.exe, click OK. (Change
D: to match your CD-ROM drive letter)
4. Follow the on-screen instructions to complete the installation.