Ig h – Liberty Garden 871 User Manual

Page 3

FIGURE 2

FIGURE 3

FIGURE 4

FIGURE 5

FIGURE 1

1. Turn Frame

(A) on it’s back. Insert Axle Bolt (N) thru the

axle bushing on the frame. Put axle nut

(O) on the axle.

Hold the axle bolt with one wrench and tighten the nut on

the inside of the frame with another wrench. Tighten securely.

Repeat on all remaining axles.

See Figure 1

2. Place the wheel over the axle with the air valve facing out.

Place the axle washer

(P) over the thread and screw on

axle nut

(O) and tighten securely. Repeat for each

remaining wheel.

See Figures 2 & 3

4. Insert the Brass Swivel

(G) through the U-bushing

(I) and screw the end of the swivel into the

galvanized tee

(H). See Figure 4. Using a wrench,

tighten the swivel into the galvanized tee. Tighten

securely but do not over tighten. Over tightening

the swivel could cause leakage.

3. Set the cart upright on the wheels.

5. Screw the galvanized tee

(H) onto the spool

end

(B) Tighten with wrench. See Figure 5

FIGURE 4