Liberty Garden 870 - Manual (Page 4)

4
6. Place the spool (A) on the frame (B) so
the bushings are oriented over the holes on
the frame. You may have to compress the
spring to get the spool oriented properly.
7. Using the 1.75” bolts (J), insert them thru
the bushing and thru the holes on the frame
(B). Attach lock nuts. Repeat for other side
of the spool. After the 4 bolts and nuts are
attached you may tighten the nuts.
See Figure 7
8. Slide U-Handle (D) over the frame
extensions and align the holes. Insert 1.44”
Bolts (L) thru handle holes and attach wing
nuts. Hand tighten. See Figure 8.
L
L
D
B
A
B
J
FIGURE 6
FIGURE 7
FIGURE 8