Liberty Garden 1180 User Manual
Page 3
1. Flip frame
(B) over. Attach rubber feet (Q) to
bottom of frame. Insert bolts into bottom of frame.
Attach nuts and tighten. Flip frame back over.
See Figure 1
3. Turn spool
(A) around and slide a plastic spacer
washer
(L), spring (I) and another plastic spacer
washer
(L) over the pipe. See Figure 3
2. Take Spool
(A) and align the elbow/ galvanized
tee (pre-assembled) side of the spool with preas-
sembled U-Bushing
(H). Insert the brass swivel (J)
through the U-bushing and screw into the galva-
nized tee. Tighten using a wrench. Be sure to use
Teflon/ Plumber’s tape on the threads.
See Figure 2
4. Insert U-bushing
(H) and align with the holes in
the frame
(B) and insert U-bushing bolts (O) and
attach nuts
(P). You may need to put pressure on
the spool by compressing the spring to align
holes. Tighten U-bushing nuts using a wrench.
See Figure 4
3
CART ASSEMBLY
FIGURE 1
Q
B
FIGURE 2
FIGURE 3
FIGURE 4
H
H
A
B
L
J
A
L
O
P
I