LEWITT LTS 240 Dual C+D - Manual (Page 6)

LTS 240 Dual C+D
Using the mic
Best performance
7 Use balanced XLR cables in order to avoid EMI effects.
8 . Position the receiver in a reasonable distance to metal surfaces, walls and other RF equipment.
.
Quick start
1
of the receiver.
2. Make sure that the volume of your mixer is turned down before you connect the receiver via a balanced ⑧, ⑨ or unbalanced ⑩ cable.
3. Make sure that the volume of your mixer is turned down. Then turn on the receiver with the on/off switch on the backside ⑦.
4. Open the transmitter body and insert two AA batteries.
5. Turn the transmitter on .
6. Adjust the volume level , on the backside of the receiver and on your mixer to the desired level.
. Connect the power supply to mains and the receiver ⑤. We recommend to secure the power cable with the security latch ⑥ on the backside
06