LEWITT LCT 240 - Manual (Page 5)

LCT 240
Using the mic
Status indicator ①
·The microphone is in normal working mode if the status indicator is illuminated in white.
·The microphone is in key-lock mode if the status indicator is not illuminated.
·The microphone is experiences clipping due to high SPL if the status indicator flashes in red.
·The microphone is in automatic attenuation mode if the status indicator is illuminated in red.
·The microphone indicates the clipping history if the status indicator flashes red and white in an
alternating sequence.
User-interface
②
③
① Status indicator
Attenuation indications
Noiseless attenuation push button
④
⑤ High-pass filter indications
Noiseless high-pass filter push button
Attenuation indications ②
·
The currently active attenuation setting is illuminated.
Setting an attenuation level
·Attenuation levels can be set by briefly pressing the noiseless attenuation push button ③ . Settings are: off,
-10 dB and -20 dB.
Attenuation is used in extremely high SPL environments in order to prevent clipping of the microphone, mixer and other audio equipment.
④
⑤
①
②
③
05