LABEC J-WD - Manual (Page 10)

6. Trouble shooting.
1. In case apparatus fails to work at all:-
• Control unit switched off:-
=> Ensure unit is on.
• Power supply shortage:-
=> Refer to specifications and check whether sufficient power is being supplied.
=> Is the breaker on the side of outer part open?
• Check if lamp is turned down.
=> Check unit in a power outlet that is known to work.
If still does not work, contact your local LABORATORY EQUIPMENT PTY LIMITED
agent/distributor & have it repaired.
2. In the machine inclined?
Install the machine horizontally all the time.
• In case general failure:-
=> Check unit in a power outlet that is known to work.
If still does not work, contact your local LABORATORY EQUIPMENT PTY LIMITED
agent/distributor & have it repaired.
7. After-sales service.
7.1 Free repair
Faults which is responsible for manufacture in normal condition can be repaired with free for
1 year from purchase date (only, pressure vessel is zero year), and it is desirous to check
following items when requesting A/S.
Part and condition generated fault
(It is necessary to explain in detail within limit of possibility)
. Model name
. Serial Number
. Purchase date (year, month, date)
7.2 Chargeable repair
In the following cases, the customer will be required to pay for the following repairs:
- Fault by user mistake, unsuitable repair or modification
- Fault by negligence for carrying and handling during use
- Fault due to natural disasters such as fire, flood disaster and abnormal voltage
- Fault by using against direction for use.