SoundMax SM-CMD3002 - Manual (Page 10)

10
General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press EJECT
button, then press the RESET button to restore the unit to the original factory settings.
Power button
Press the SRC/PWR button on the front panel or PWR on the RC to switch the unit on. Press it again to switch
the unit off.
Volume control
Rotate VOL knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level.
Audio settings adjustment
Press MENU button shortly on the panel to enter the Menu, choose AUDIO and using UP/DOWN buttons select
the mode: BASS => TREBLE => BALANCE => FADER. With LEFT/RIGHT buttons adjust each mode.
- BASS/TREBLE:-7, -6, -5,......, 0, +1, +2,......+5, +7
- BALANCE: L07,......,R07
- FADER: L07,......,R07
Note: Adjustments to Bass and Treble will override any preset EQ (Preset Equalizer Curves).
In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last display
mode of radio or disc playback mode.
Mode selection
Press the SRC/PWR button on the panel or the SOURCE button on the RC to select the mode: RADIO => USB
=> SD => DVD =>TV => AUX.
Mute function
Press the MUTE button on the RC to cancel the sound. Press again to resume.
Equalizer setting
Press EQ button on the RC repeatedly to select EQ mode: NORM => ROCK => JAZZ => CLAS => POP or enter
the EQ mode through the Menu setting (Audio Mode settings), press MENU button on the panel.