LABEC Z-L-530 - Manual (Page 5)

Contents
1st Terms of safety using 5
1.1 Notes of Operation 6
2 nd Introduction of Low-speed Table-top Centrifuge 7
2.1 Overview 7
2.2 Introduction of Equipment 7
2.3 Security structure 9
2.4 Requirement of placing the machine 10
3 rd preparation before using 11
3.1 Transportation and installation 11
3.2 Choose suitable place to place 11
3.3 Put the machine at fixed place 12
3.4 Connect the power supply in correct way 12
4th Operating instructions 13
4.1 Introduction of control panel and display interface 13
4.2 Start the machine 14
4.3 Open the door 14
4.4 Close the door 14
4.5 Installation of the rotor 15
4.6 calculation of rotor load 16
4.7 Filling of sample in the centrifuge 16
4.8 Use the rotor in safe way 17
4.9 Example of operating of parameter setting 17
5th Items of maintenance 21
5.1 Cleansing and purification 21
5.2 Maintenance responsible by Our company 23
6th Fault Handling 25
6.1 Open the cover in case of emergencies 25
6.2 Alarm Information of fault 25
7th Packing list 29
8 th Certificate 30
Appendix 1 Type of rotor and technical parameters 31
Appendix 2 Technical Data 32