LABEC Z-L-450A - Manual (Page 4)

● Do not use centrifuges or separate the sample with the door is open.
● The replacement of mechanical accessories and electronic device of centrifuge should be
implemented by designated person of Our company.
● When operators are using the centrifuge, they shall choose rotor with appropriate load and
shall not use the rotor overload;
● Check rotor regularly. Stop to use it once there is obvious corrosion or obvious damaged
signs on the rotor;
● After a period of using, Please do the maintenance according to the rules of "cleansing and
disinfection".
2 nd Operating instructions
2.1 Introduction of control panel and display interface
Figure1: schematic drawing of control panel
Introduction of Figure1, Function of control display panel:
SPEED r/min: Speed display
TIME min: Time display
+ - : Set speed /time
STOP： stop button
START：Start button
Door keys are located on the right side of the instrument. (radio button)
3 rd Packing List
Packing list of Low-speed centrifuge of general air-cooled
Number Name Qty Note
1 low-speed table-top centrifuge 1set
2 power cord 1pc
3 Angle rotor 20ml×8 1pc
4 English service manual 1pc
When you open the package, please check in time, if there's anything wrong,
please kindly contact our company or authorized dealers in time.