Kuzma Stabi REF 2 101014 - Manual (Page 11)

11
Silver spike
Transportation
For short distances dismantle the platter, remove belt and disconnect all cables. Block the
tonearm's tube and then the turntable with the subplatter can be transported as it is, providing
that it will not be tilted more then 15 degrees, which could cause oil leakage.
If the subchassis might possibly be tilted more than this angle you should remove the bearing
oil and it is advisable to protect the ruby ball.
Removal of the subchassis automatically seals the oil wells. Should the base chassis be held
vertically or upside down for more than a moment, it should be left for 3-4 hours in a
horizontal position before use.
All parts are heavy and can be easily damaged by sliding around a transport vehicle.
Repacking in the original boxes is, therefore, recommended.
Kuzma Ltd
Hotemaze 17A
SI-4205 PREDDVOR
SLOVENIJA
Phone: + 386 4 25 35 450
Fax: + 386 4 25 35 454
E mail:
[email protected]
www.kuzma.si
.