Centro 85-1620-6 - Manual (Page 11)

9
2
Remove all burners including the 3 main U burners, by unscrewing
the screw and nut that affix the burner to the burner support bar,
as shown in Figure A.
Nut
3
Remove the Sear Zone Burner (Figure E) by unscrewing the Sear
Zone electrode (Figure C), and 4 screws from the burner (Figure D).
Sear Burner
Electrode
These 4 screws have to be taken out
Screw
Fig. A
Fig. B
Fig. C
Fig. D
Fig. E
Figure B shows all 3 main U-Burners removed.