KGUARD Security SHA116.V2 - Manual (Page 42)

ENGLISH
Chapter 4: Using the DVR
42
DVR User’s Manual
Note:
If the frame rate which you set is over the system limitation, a message is displayed on the screen. For example, as
below:
4.2 Setting the Network
To enable remote monitoring, recording, playing, or configuring the setting, you need to configure the network settings
first. There are five types of network setup: DHCP, PPPoE, Static IP, DDNS, Port Forwarding. Consult your Internet
Service Provider (ISP) to determine the type of network connection you are using and the required parameters to
complete the setup.
4.2.1 DHCP
The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > NETWORK.
3
On Type, select DHCP.
4
Specify the Media Port and WEB Port numbers.
5
After all settings are complete, click Apply.
6
When data saving is complete, click OK.