Kannad Marine SPORTPRO - Manual (Page 13)

Page 11
Mounting procedure
The bulkhead bracket is designed to mount on a flat surface using four fixing points.
Four stainless steel screws 25mm in length are included. Check that the rear side of the
mounting surface is clear and that the fixing screws will not penetrate through into any other
objects.
Offer the bracket into the chosen position and mark through the mounting slots using the
bracket as a template.
Drill four 3mm (1/8
”) holes and securely screw the bracket in place.
Stowage options
The Carrysafe collar provides additional protection for the EPIRB if you intend to keep it in a
carry off
“safety ditch bag” or when transporting the EPIRB from place to place.
i
CAUTION: Do not stow the EPIRB near to magnets, loud speakers or other
equipment containing magnets. As they may cause to EPIRB to falsely activate.