Kannad Marine AIS SART - Manual (Page 5)

Page 4
AIS SART pictured left is ready for deployment with the
mounting pole fully extended.
The activated AIS SART should be positioned upright and
with a clear view of the sky.
Do not obstruct the GPS zone marked on the side.
The AIS SART should be manually erected when the liferaft
is deployed.
The antenna datum marked on the pole section should be
positioned at least one metre above sea level when the AIS
SART is deployed.
TEST button First Function:
Self test verifies the
readiness of the AIS SART.
Second function:
Press and hold the
TEST
button to turn the unit
OFF
Red LED
Indicates the operating
status.
ON button To activate the AIS SART:
Press the ON button until the
Red LED starts to flash.