Curtis LCDVD195A - Manual (Page 34)

DVD Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom Cause Solution
TV/DVD mode for this product is
not set to DVD.
-33-
TV-SYSTEM ATSC/NTSC
RECEIVING CHANNEL Air, Cable STD, Cable HRC, Cable IRC
PROGRAM CHANNE S Air 2-69, Cable 1-135
RF-ANTENNA INPUT 75 ohms
OPERATING VOLTAGE 120V AC, 60Hz
AUDIO BTSC
AUDIO/OUTPUT POWER (%10 THD) 2 x 2W
POWER CONSUMPTION(W)
65 W
3W (Stand-by)
PANEL 16:10 Wide Display, 19” screen
WIDE 200 mm
LENGTH 460 mm
HEIGHT 380 mm
SIZE (mm)
WEIGHT (KG)
9- Product specifications
5.0
Design and specifications are subject to change without any notice
Press TV/VID EO button on the
remote control repeatedly to
choose DVD mode.
No picture.
The playback picture is poor.
The DVD does not start playback.
The disc is dirty.
No disc is inserted. The disc is dirty.
No disc is inserted.
An unplayable disc is inserted.
Insert a playable disc. (Check the
disc type, color system, and
regional code.)
The disc is not placed within the
guide. Place the disc on the disc tray
correctly as the guide.
The disc is dirty. Clean the disc.
The Rating level is set.
Cance l the Rating function or
change the rating level.