Cobra Electronics MR HH415LI VP EU - Manual (Page 42)

37 Nothing Comes Close to a Cobra ®
Setup Mode Programming
VibrAlert ® Mode
In VibrAlert ® mode, your radio can alert you to incoming
signals by sounding an audible call tone, a silent vibration or
both.
To set VibrAlert ® :
1. The display will show either the Vibrate icon (shake
bars), Call Tone icon (bell shape) or a combination
VibrAlert
® icon.
2. The present setting of either, 01, 02 or 03 will be
flashing.
3. Press Channel Up/Down button to select one of the
following:
01 = VibrAlert ® On (both shake bars and bell
shape).
02 = Vibrate On (shake bars only).
03 = Call Tone Only On (bell shape only).
4. Press Call/Enter/Setup button to save this entry and
move to the next setup programming mode.
Operating Your Radio
VibrAlert ® Tone Alert
MRHH415EU-Body.qxp:400_Body 12/15/06 10:00 AM Page 37