Chicago Electric 65588 - Manual (Page 7)

SKU 65588 For technical questions, please call 1-800-444-3353. Page 7
read the entIre IMportant
saFetY InForMatIon
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
to prevent
serIous InjurY:
operation of this equipment
may create sparks that
can start fires around dry
vegetation.
a spark arrestor may be
required.
the operator should contact
local fire agencies for laws
or regulations relating to fire
prevention requirements.
operatIng InstructIons
read the entIre IMportant
saFetY InForMatIon section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
to prevent serIous InjurY
FroM accIdentaL startIng:
turn the power switch of the
equipment to its “oFF”
position, disconnect the spark
plug wire(s) before assembling
or making any adjustments to
the equipment.
engine controls
engine switch 1. , disables engine in
“OFF” position.
Figure 1
AC 120 V Outlets DC Outlet
Economy (on/off) Switch
Pull (Recoil)
Starter
Handle (4)
Engine (on/off) Switch
A
B
C
D
3
2. economy control switch decreases
output of Generator when less power
is needed. This will result in better
fuel efficiency and lower noise vol-
ume.
overload Light (a)
3. comes on when
the Inverter Control Unit overheats, or
the AC output rises above 7.9 AMPS.
The electronic breaker will then ac-
tivate, stopping power generation in
order to protect both the Generator
and any connected devices. The AC
pilot Light (B) (green) will go off and
the Overload Light (C) (red) will stay
on. The Generator Engine will stop
running. When this happens, pro-
ceed as follows: