Controls/component locations – Cadet CDT7 User Manual

Page 11

CONTROLS/COMPONENT LOCATIONS

CADET 86038220

3-2

1. Main Handle. Used to pull and maneuver

machine.

2. Electrical

Cord.

3. Pump

Switch. Turns on pump and enables

spray.

4. Brush/Spray

switch. Turns on brush motor

and activates electro-valve to dispense solution
to floor through jets. Intermittent, off, and
continuous settings.

5. Vacuum Motor Switch. Turns on vacuum

motor

6. Brush Motor Circuit Breaker. 6 amp. Breaker

protecting brush motor.

7. Vacuum Motor Circuit Breaker. 15 amp.

Breaker protecting vacuum motor.

8. Recovery Dump Hose. Facilitates draining

dirty cleaning solution.

9. Solution Dump Hose. Facilitates draining

excess cleaning solution from solution tank.