Clarion S100 - Manual (Page 22)

19
power saving mode
Your system will automatically enter a power saving mode while armed
or in valet mode, after a period of time in which no operation has been
performed. This lowers the current draw to the vehicle’s battery. Power
Saver mode takes over under the following conditions:
➤ Power saving when the system is armed: After the system has
been armed for 24 hours, the LED will flash at half its normal
rate, decreasing the system's current draw.
➤ Power saving in valet mode: When the system enters valet
mode the LED illuminates steadily. If the vehicle is not used
(ignition is not turned on) for a period of one hour while the
system is in valet mode, the LED will shut off. If the system
remains in valet mode, the LED will come back on the next
time the ignition is turned on and then back off.