Creative Labs MuVo V200 - Manual (Page 13)

11
Listening to FM Radio
To change the FM region
Perform these steps when scanning for stations for the first time.
1. Press the Scroller.
2. Scroll Select the Settings icon (Figure 2). A list appears.
3. Select the FM Region icon (Figure 3). A list appears.
4. Select the region that you are in.
To perform an autoscan and autosave
1. Connect your earphones to the earphone jack.
2. Scroll Select the FM Radio icon (Figure 4).
A radio frequency appears on the LCD screen.
3. Press the Scroller.
4. Scroll Select the Autoscan icon (Figure 5). The player scans
and stores channels it detects. At the end of the autoscan, it
automatically saves all channels and plays the first channel.
To select a channel
1. Scroll Select the FM Radio icon (Figure 4).
A radio frequency appears on the LCD screen.
2. Turn the Scroller to select the preset channel you want.
For more information, read the User’s Guide on the Installation CD.
Go to d:\manual\\manual.pdf (replace d:\ with the drive letter of your CD-ROM/
DVD-ROM drive, and for the language the document is in)
Figure 2
Figure 3
Figure 4
Figure 5
MuVo V200 QSB.fm Page 11 Tuesday, July 27, 2004 11:48 AM