Philips AZ2558-17B - Manual (Page 3)

ice the bass control
You cannot combine
with wOOx
:s GAMESOUND once
.R5I , PUNCH ,
Bvailable when you
control to interrupt
Y
rut sound and the
iction you can:
rn, then press
elect
TUNER (or press
control).
briefly followed by
d preset station
ice or more to select
:he remote control)
in tune to your
rmatic search tuning:
or ►► on the remote
when the frequency in
ones to a station of
ilay shows 5ERRCH
until you find the
iress r« or^w (•« or
riefly and repeatedly
DIGITAL TUNER 0“
until you have found optimal reception.
To improve radio reception:
• For FM, extend, incline and turn the telescopic
antenna. Reduce its length if the signal is too
strong.
• For AM, the set uses a built-in antenna. Direct this
antenna by turning the whole set.
Programming tuner stations:
You can store up to a total of 30 radio stations in the
memory, manually or automatically (Autostore).
Autostore
Automatic programming will start from preset 1. The
set will only program stations which are not in the
memory already.
7. Press ALBUM / PRESET- or + once or more to
select the preset number.
2. Press PROG for 4 seconds or more to activate
auto store programming.
-►Display: RUID5TCIRE is shown and available
stations are programmed in order of waveband
FM, followed by AM , preset 1 station will then
be played after all stations are stored
automatically.
Manual programming
7. Tune to your desired station (see Tuning to
stations).
2. Press PROG to activate programming.
-► Display: program flashes.
3. Press ALBUM / PRESET- or + once or more to
allocate a number from 1 to 30 to this station.
4. Press PROG again to confirm.
-► Display shows the preset number, waveband
and the frequency of the preset station.
5. Repeat the above four steps to store other
stations.
Note: You can erase a preset station by storing
another frequency in its place.
To listen to a preset station
Press ALBUM / PRESET- or + once or more until
the desired preset station is displayed.
HEAVY!
Take care of your CD Soundmachine.
Grip both handles when you carry or
lift the set.
AYER
select and store your
ice. If you like, store
D 20 tracks can be
the set to select your
3 remote control !◄ or
- or + once or more to
ARCH K
the selected track
rs briefly.
'R l K if no track
ing.
and store all desired
try to program more
sc program, press Hi.
you can press PROG
GAMESOUND/USB PC LINK
GAMESOUND (See d)
PLAYING WITH GAMESOUND:
7. Press SOURCE once or more on the set to select the
GAME*AUX function (AUX on the remote control)
-►Display scrolls: ORIIE PORT
2. Connect your console to the cinches on the front
of the set AUDIO IN ( LEFT / RIGHT) and VIDEO
IN.
3. Press GAMESOUND once or more to select your
game sound option.
-►Display briefly shows 1LR5T , PUNCH ,
5PEEI! or NGRNRL,
Connecting other equipment to your system
Use the supplied video cable to connect the VIDEO
OUT terminal on the back of the set to VIDEO IN on
a TV or VCR for viewing or recording.
USB PC LINK
Quick Setup Guide
PC system requirements
- USB port with Windows 98 SE / ME/ 2000/ XP
- Intel Pentium MMXX200 or higher
a
;-iB|
0
( igi H e M)
s 0