Capresso Impressa Z5 User Manual
Page 25
a. Push the Rotary Dial.
SELECT PRODUCT
.
b. Push the beverage button for which you want to change the
temperature, e.g. the 1-cup Espresso Button. The display
shows
1 ESPRESSO HIGH
.
c. Turn the Rotary Dial and select
NORMAL
(example).
d. Push the Rotary Dial to confirm.
CONFIRMED ✔
e.
TEMPERATURE
. To change another beverage button start
with a. again.
26.3 COFFEE STRENGTH / AROMA
You can set the coffee strength for the Cappuccino Button, the
Special Coffee Button and the four coffee buttons on the right
side to
XMILD
,
MILD
,
NORMAL
,
STRONG
,
XSTRONG
. For
factory settings see chapter 5. In
XMILD
the 1-cup buttons grind
for about 4 seconds, in
XSTRONG
for about 8 seconds. The 2-
cup buttons grind between 7 and 10 seconds respectively. The
minimum amount of coffee to be ground is approx. 5 grams, the
maximum approx. 16 grams.
Please note: the amount of ground coffee also depends on the
fineness settings of the burr grinder. The coarser the setting the
more coffee is ground through the burrs.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows
FILTER
.
• Turn the dial until the display shows:
AROMA
a. Push the Rotary Dial.
SELECT PRODUCT
.
b. Push the beverage button for which you want to change the
coffee strength, e.g. the 2-cup Coffee Button. The display
shows
2 COFFEE NORMAL
.
c. Turn the Rotary Dial and select
XSTRONG
.
d. Push the Rotary Dial to confirm.
CONFIRMED ✔
e.
AROMA
. To change another beverage button start with a.
26.4 CAPPUCCINO PROGRAMMING
Chapter 25.2 explains how to change the pre-sets for milk and
the coffee volume while the Z5 is brewing. In programming you
can simply change the pre-sets by changing the values shown in
the display without making the beverage.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows
FILTER
.
• Turn the dial until the display shows:
CAPPUCCINO
a. Push the Rotary Dial. The display shows
MILK 15 SEC
b. Turn the Rotary Dial until the desired duration is displayed,
e.g.
MILK 20 SEC
.
c. Push the Rotary Dial to confirm.
CONFIRMED ✔
.
Now the display shows
COFFEE 3 OZ
.
d. Turn the Rotary Dial until the desired coffee volume is
displayed, e.g. to
COFFEE 5 OZ
.
e. Push the Rotary Dial to confirm.
CONFIRMED ✔
Now the display shows
CAPPUCCINO MILK 20 SEC
.
f. Turn the Rotary Dial until the display shows
EXIT
and push
the Rotary Dial.
COFFEE READY
26.5 MILK PROGRAMMING
Chapter 25.3 explains how to change the pre-sets for milk
volume while the Z5 is brewing. In programming you can simply
change the pre-set by changing the duration shown in the
25.