Cary Audio Design Xciter - Manual (Page 11)

CONTROLS AND DISPLAYS
10
FRONT PANEL
1. AC POWER SWITCH
• Press the “1” at the top of the rocker switch to turn the power ON.
• Press the “0” at the bottom of the rocker switch to turn the power OFF.
2. SOURCE SELECTOR SWITCH
• Rotate to select one of 3 inputs for each channel
3. MUTE INDICATOR LED
• Indicates mute function is activated when illuminated
• Press remote control “Mute” button to activate Mute, Press “Mute” button again to
deactivate the Mute function
4. LISTENING LEVEL CONTROL
• Rotate to adjust the listening (or volume) level of the amplifier output
• Press remote control Volume “- ” or “+” buttons to adjust listening level
5. INFRARED (IR) SENSOR
• Sensor receives signals from remote control hand held sending unit
• Keep sensor free from obstructions, the sensor will not receive the signals from the
hand held unit if obstructed
6. HEADPHONE SELECTOR SWITCH
• Rotate to “On” position to select output to the headphones
• Rotate to “Off ” position to select output to the speakers (the headphone output is
disabled when switch is in the “Off ” position)
7. HEADPHONE JACK
• Standard ¼” diameter 3 circuit headphone access jack
• Use dynamic 30 – 300 ohm impedance headphones
8. HEADPHONE INDICATOR LED
• Indicates headphone function is activated when illuminated