COBY electronic MP-C546 - Manual (Page 32)

Page Coby Electronics Corporation www.cobyusa.com Page
Connecting to a Computer
Make sure the player is turned off.
Use the supplied USB cable to connect the MP-
C546 to your computer’s USB port.
You can switch between USB modes quickly after
your player has been connected to the computer.
Press and hold during connection to toggle
between the USB modes.
USB-MTP Mode
When the MP-C546 is connected under USB-MTP mode:
Your computer will automatically recognize the
player as an MTP Device. An icon representing
your player will appear under “Audio Devices” when
you open “My Computer”.
It may take Windows several minutes to recognize
and set up the device the first time it is connected
depending on your hardware configuration.
USB-MSC Mode
When the MP-C546 is connected under USB-MSC mode:
Your computer will automatically recognize the
player as an MTP Device. An icon representing
your player will appear as a “Removable Disk” when
you open “My Computer”.
It may take Windows several minutes to recognize
and set up the device the first time it is connected
depending on your hardware configuration.
1.
2.
3.




USB CONNECTIONS