Adjusting the viewing angle, Rotating the monitor – Compaq HW194 User Manual
Page 10
User’s Manual
ADJUSTING THE VIEWING ANGLE
•
For optimal viewing it is recommended to look at the full face of the monitor, then adjust
the monitor’s angle to your own preference.
•
Hold the stand so you do not topple the monitor when you change the monitor’s angle.
•
You may adjust the monitor for a viewing angle of 0° to 20° vertically and 0° to 30°
horizontally.
Figure.3-1. monitor’s angle
ROTATING THE MONITOR
•
When rotating the monitor, make sure to hold the base firmly to prevent shaking the
monitor.
•
Raise the monitor to its maximum height to rotate the monitor; otherwise the monitor will
not turn.
•
You may turn the monitor clockwise from 0° to 90°.
Figure.3-2. Rotating the Monitor
NOTE:
In order to use portrait mode, your graphics card must be compatible to support this mode.
Please refer to your graphics card user manual if it supports this mode.
10