Crestron electronic CNWM User Manual
Page 10

CRESTRON
Change RF ID Crestron Software
(not required for SmartPresenter)
Use the Crestron Performance ViewPort to set a RF ID CODE. Using either SIMPL
Windows or VisionTools Pro, select ViewPort from the Tools menu; the “Crestron
Performance Viewport” dialog box, shown below, appears.
Crestron Performance Viewport Dialog Box
From the Options menu in the dialog box, select Set Transmitter ID to open the
“Set Transmitter ID” dialog box. Enter a two-digit hexadecimal number ranging
from 10 to FE. Click OK to confirm.
Set Transmitter ID Dialog Box
6
• Wireless Mouse
Operations Guide - DOC. 5700A
This manual is related to the following products: