Chauvet 6 - Manual (Page 9)

COLORado™ 6 User Manual 9 7/1/2009 4:46 PM
Hanging Clamp
Note!
Clamp is sold separately.
Mounting
Orientation
This fixture may be mounted in any safe position.
Rigging
The fixture includes a mounting yoke to which a rigging
clamp can be attached. You must supply your own clamp
and make sure the clamp is capable of supporting the
weight of this fixture. It is recommended to use at least 2
mounting points per fixture. You
can order “C” and “O”-
clamps from any CHAUVET dealer or distributor: CLP-15,
CLP-06, and CLP-16
1. Block access below the work area and use
suitable and stable platform when installing or
servicing fixture.
2. Safety cables must always be used, utilizing the
provided safety attachment points. The safety
cable must be capable of holding 10 times the
weight of the fixture.
3. Verify the structure can hold 10 times the weight
of all to-be installed fixtures.
Caution! After prolonged periods of operation, the fixture
chassis may reach high temperatures. This fixture
must be mounted in a ventilated location, as it is
convection cooled.