T) ac in, Main power switch, Ac out – Philips Signage Solutions Écran E-Line User Manual
Page 2: 0 usb, Ir pass through, Rs232c out, Rs232c in, Rj-45, Hdmi in, Displayport
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E-Line Display
55" Edge LED Backlight, Full HD
Input/Output Terminals
BDL555IEI_/00
(T)
AC IN
AC power input from the wall outlet.
© MAIN POWER SWITCH
Switch the main power on/off.
© AC OUT
AC power supply to the AC IN jack of a media player.
0 USB
Connect your USB storage device.
© IR pass through:
Outputs the remote control IR signal of the display to an external
set-top box through 3.5mm jack cable.
© RS232C OUT
RS232C network output for the loop-through function.
© RS232C IN
RS232C network input for the loop-through function.
® RJ-45
LAN control function for the use of remote control signal from
control center
© HDMI IN
HDMI video/audio input
© DisplayPort
DisplayPort video input
DVI-D video input.
® DVI OUT / VGA OUT
DVI or VGA video output.
@ VGA IN (D-Sub)
VGA video input
©VGAAUDIO IN
Audio input for VGA source (3.5mm stereo phone).
® COMPONENT IN (BNC)
Component YPbPr video source input.
® Y/CVBS
Video source input.
@ SPEAKER SWITCH
Internal speaker on/off switch.
©AUDIO IN
Audio input from external AV device (RCA).
© AUDIO OUT (RCA)
Audio output from the AUDIO IN jack to an external AV device.
© SPEAKERS OUT
External speakers output.
@ OPS SLOT
Slot for installing the optional OPS module.
@ KENSINGTON LOCK
Used for security and theft prevention.
PHILIPS
© 2013 Koninklijke Philips N.V. All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the properly of Koninklijke Philips
N.V. or their respective owners.
PCSM025-I33600EN