Chauvet 260-LED - Manual (Page 2)

Q-Wash 260-LED QRG
Page 2 of 10
About this
Guide
The Q-Wash 260-LED Quick Reference Guide (QRG) only contains
the product’s connection and mounting information, as well as the
menu options and the DMX values.
Disclaimer
 This Quick Reference Guide DOES NOT replace the product’s
User Manual.
 Make sure to download the latest version of the product’s User
Manual from ( www.chauvetlighting.com ).
 You must read ALL the disclaimers and safety notes in this
document as well as those in the product’s User Manual before
installing, operating, or maintaining this product.
Safety Notes  DO NOT open this product unless instructed. It contains no user
serviceable parts.
 DO NOT look at the light source when this product is on.
 DO NOT touch the product when it is operating because it may
be hot.
 DO NOT cover the ventilation slots when the product is
operating to avoid internal overheating.
 DO NOT install or operate this product where there is less than
50 cm to the nearest surface to allow adequate ventilation around
it.
 DO NOT leave any flammable material within 50 cm from this
product while operating or connected to the power outlet to
minimize the risk of fire.
 DO NOT carry this product from the head. Use the handles
instead.
 DO NOT mount this product overhead without using a safety
cable.
 DO NOT operate this product outdoors or in any location where
dust, excessive heat, water, or humidity may affect it.
 DO NOT operate this product if you see damage on the housing,
lenses, or cables. In any of these cases, have the damaged parts
replaced by an authorized technician at once.
 DO NOT connect this product to a dimmer or rheostat.
 ONLY connect this product to a grounded and protected circuit.
What is
Included
 One Q-Wash 260-LED
 One locking IEC to Edison plug input power cord (US market)
 Two hanging brackets
 Four M8 bolts (6 mm head)
 One safety cable
 One custom cut, removable 1° Color Blending Filter
 One Warranty Card
 One Quick Reference Guide