Contemporary Research ICC2-ATSC - Manual (Page 8)

HD2-RC IR Remote
The HD2-RC IR Remote included with the ICC2-ATSC can be used to setup the tuner and for daily operation.
All of the functions on the remote have equivalent commands in RS-232, Ethernet, and Wired IR formats. In
addition, the ICC2-ATSC front panel buttons can perform Power, Channel, and Volume control
.
Power
Turns tuner on and off. Discrete on and off IR commands are
available as well.
Volume Control
Use the Vol+, Vol- and Mute buttons.
Channel Selection
The key change in digital tuning is the need to add a dash (-) and
number after the traditional channel number. Analog channels are
accessed using XX-0, digital channels using XX-1 (or -2, -3, etc).
Ch+, Ch- and PrevCh can be used to access and recall channels.
Menu Operation
Press Menu to access the on-screen menus.
• Use the directional Arrows, Select and Exit to navigate the
menus.
• List displays the list of all channels, arrow keys add/remove
channels, set Favorite Channel list
• Exit steps backwards out of menus
• Enter selects menu choice
Special Functions
• CC steps through available closed-captioning options
• Audio selects audio and SAP modes
• Signal displays channel signal level
• Ratio steps through aspect ratios, options depend on
channel and output types
• Info launches on-screen information window
• A/C selects Air or Cable tuning
• Fav Displays list of favorite channels
• Guide displays on-screen Guide
Features of many of the Special Function commands depend on
whether the current channel is analog or digital.
Contemporary Research 8 ICC2-ATSC HDTV Tuner/Controller